How to Block and Allow User Connected to your Wireless Netis Router

Step 1: Connecting your TM Netis router by LAN 1 port to the your laptop or PC using cable.

Step 2: Don't forget to plug in power adapter and press the ON button.

Step 3: Set TCP IP your laptop or PC:
IP Address: 192.168.1.2
Subnet mask: 255.255.255.0
Gateway: 192.168.1.1

Step 4: Open internet browser and search 192.168.1.1 to enter User login page.

Step 5: Once you are enter into user/admin login page.

Step 6: Go to "WLAN", "wlan0 (2.4GHz)" Access Control" “WLAN Access Control” Select ”Mode: Allow Listed” and click “Apply Changes”.

Step 7: Check existing device MAC address connected to wireless Netis router 2.4GHz.

Step 8: Go to "WLAN", "wlan0 (2.4GHz)" “Basic Setting” “Associated Clients:” and click "Show Active WLAN Clients". Copy all MAC address.

Step 9: Go back at “WLAN” “Access Control” and fill in “MAC Address:” your device than click “Add”.

Step 10: Go to "wlan0 (5GHz)" Access Control" “WLAN Access Control” Select ”Mode: Allow Listed” and click “Apply Changes”.

Step 11: Check existing device MAC address connected to wireless Netis router 5GHz.

Step 12: Go to "WLAN", "wlan1 (5GHz)" “Basic Setting” “Associated Clients:” and click "Show Active WLAN Clients". Copy all MAC address.

Step 13: Go back to "wlan0 (5GHz)" Access Control" “WLAN Access Control” Fill in “MAC Address:” your device and click “Add”.

Step 14: Recommend go to "Maintenance" , Reset/Reboot , “Commit and Reboot” and click "Reboot".

Step 15: You had completed the setup!.

Step 16: Test your wireless connection now!

Pleas follow us:
Hotspot System
http://hotspotsystem.com.my
https://www.facebook.com/hotspotsystem.my
https://www.instagram.com/hotspotsystem

eHow Malaysia
https://eHow.my
https://www.facebook.com/eHowMalaysia
https://www.instagram.com/eHowMalaysia

Kursus CCTV
https://kursuscctv.com
https://www.facebook.com/kursuscctv
https://www.instagram.com/kursuscctv